Skip to main content

Install LineageOS 16.1 on SM-J610(x) Samsung Galaxy J6 Plus


Unlock the Bootloader

Unlocking the bootloader involves complete removeal of your files. So, do a backup for your important files.

  • Go to Settings -> About Phone -> Software Information
  • Tap on “Build Number” 7 Times
  • Developer option will be enabled
  • Go to Settings -> Developer Options (At the bottom)
  • Enable “OEM Unlocking”.
  • You have to format your phone.

Risk !!!

Proceed the steps below if you are ready to take the risk of voiding your warranty (KNOX 0x1)

It’s always better to do after your device warranty is over.

Download Necessary Files

I have made a All-in-One complete Installation ZIP file.

Download Here or Click Button Below

All-In-One ZIP Official Link

Now, extract all the files to a folder.

Boot Into Download

  • Completely Power-Off your device
  • Remove every cables connected to the device
  • Press the Volume-Up & Volume-Down simultaneously.
  • Now connect your phone to the COMPUTER via Micro-USB Cable
  • Read the instruction shown there for a moment.
  • Now, press the Volume Up to continue.
  • You’ll boot into ODIN/Download Mode

Flash TWRP Recovery

  • Go to the “Odin3_v3.14.1” Folder and Open ODIN.
  • Go to the “options” tab in the left of ODIN window.
  • Uncheck the “Auto Reboot”
  • Select AP in the ODIN Window.
  • Browse to “twrp_3.3.1-1_J610x_28719.tar” file and select it.
  • [Optional] Select the “J610FXXU1BSDF_patched_boot_28719.tar” as BOOT in ODIN if you want root access on the custom ROM.
  • You will see “added !” written in the ODIN log section.
  • Now, hit on Start.

Boot Into TWRP Recovery ASAP!!!

If you let the device boot into the Operating System, Your device will be RMM locked for 7 days and TWRP recovery will be repaced with the stock recovery.

Keep pressing the Volume Down and Power for 7 seconds for the screen to turn off.

Now, when the screen turns off, Immediately release all fingers and hold down the Volume Up.

You will boot into the TWRP Recovery.

Copy some files from PC to Internal Storage or SD Card

Copy the following files to your Phone:

  • [Optional] (If you need to root)
  • mixer_paths.xml

Flash the Custom ROM

  • In TWRP Recovery, go to Wipe -> Advanced Wipe
  • Check everythig except Internal Storage, MicroSD Card and USB OTG
  • Swipe to Wipe.
  • Now go TWRP Home and Go to “Install”.
  • Browse the File
  • And Swipe to Install

Flash GApps (Optional)

If you want Google Support like Play Store and stuff, You need to flash the “” File

Reboot to Lineage OS 16

The First Boot can take upto 10 mins for booting.

Please be patient.

Setup your Device

When the device bootsup, Setup your device.

Now, check for any sound problems in your devices.

If you have low sounds, you need to DO THE STEPS BELOW

Fixing Audio Problems

Do this only if you have problems with the Audio on Custom ROM.

Reboot to Recovery

  • Power off device without connecting any cables.
  • Press the volume up and power.
  • You’ve got into recovery.

Replace the “mixer_paths.xml” file

  • In TWRP, go to Mount.
  • Mount Everything.
  • Go to TWRP home -> Advanced -> File Manager.
  • Go to /vendor/etc/ and delete the “mixer_paths.xml”.
  • Now, come to the Internal storage(or SD Card) and hit on “copy” for the “mixer_paths.xml” file that I’ve provided you on the ZIP.
  • Paste that on the /vedor/etc/ directory.

Congratulations, LineageOS 16 On the Go !

That’s it guys 🙂

Consider Donating to me (Via, “Buy me a coffee” on the right)if you’ve found this helpful and donations are always helpful and appreciated.

The YouTube Video on the top has my video log on doing this.

See ya Next time!


Popular posts from this blog

Install Lineage OS 16, TWRP, Gapps on Samsung Galaxy Tab 10.1 2019 (SM-T510)

Introduction Let’s get started on installing this wonderful ROM RISK ! Make sure you are ready to take the risk as this may can lead to complete device bricking. Download the All-in-one zip file Download full installation files as zip Steps for installation Unlock bootloader Disconnect the USB cable Power off the device Press and hold Volume Up & Down keys Insert USB cable Flash TWRP Open Odin Click on AP Select TWRP .md5 file inside the zip I asked you to download Click on start near to bottom of odin window Flash Multidisabler Copy the multidisabler file in the zip I asked you to download into your SD card. Boot to TWRP and browse and swipe to install multidisabler zip file. Flash Lineage OS with Odin As I mentioned about installing the TWRP recovery above, browse the lineage os “.md5” file as your AP and hit on start Install Gapps Boot into TWRP recovery Install gapps “.zip” file as we installed the multidisabler. Boot into Lineage OS 16 !

Fix "Post processing of the image failed" - Wordpress Error (All Solutions)

Video guide Debugging the issue There is a file at /var/log/apache2 which logs all the errors that happen on your websites. tail -f /etc/apache2/error.log This will list your errors on your apache websites real-time. See the video above to know how I debugged and solved this error. All Solutions 1. Install php-mbstring module SSH into your server and type: sudo apt-get install php-mbstringsudo service apache2 reloadsudo service apache2 restart This will install the module for you and most probably will solve this issue for you. Remember: On the video above you might have seen that doing this didn’t work right away for me. But only after continuos restart and reload of apache server. Or you might need to just reboot your server with: sudo reboot Update your php.ini First find your install php version: php -v Now that you know your php version, cd into your php version at: cd /etc/php/(php_version) Now, edit you php.ini sudo apt install nano # If nano not installed on your servernano /et